"-Synchronized-Data."

This commit is contained in:
CVE Team 2020-11-06 19:01:54 +00:00
parent 4c52a372fa
commit bb56ee7e3f
No known key found for this signature in database
GPG Key ID: 5708902F06FEF743
35 changed files with 291 additions and 54 deletions

View File

@ -0,0 +1,62 @@
{
"CVE_data_meta": {
"ASSIGNER": "cve@mitre.org",
"ID": "CVE-2020-28327",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "n/a",
"version": {
"version_data": [
{
"version_value": "n/a"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A res_pjsip_session crash was discovered in Asterisk Open Source 13.x before 13.37.1, 16.x before 16.14.1, 17.x before 17.8.1, and 18.x before 18.0.1. and Certified Asterisk before 16.8-cert5. Upon receiving a new SIP Invite, Asterisk did not return the created dialog locked or referenced. This caused a gap between the creation of the dialog object, and its next use by the thread that created it. Depending on some off-nominal circumstances and timing, it was possible for another thread to free said dialog in this gap. Asterisk could then crash when the dialog object, or any of its dependent objects, were dereferenced or accessed next by the initial-creation thread. Note, however, that this crash can only occur when using a connection-oriented protocol (e.g., TCP or TLS, but not UDP) for SIP transport. Also, the remote client must be authenticated, or Asterisk must be configured for anonymous calling."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "n/a"
}
]
}
]
},
"references": {
"reference_data": [
{
"url": "http://downloads.asterisk.org/pub/security/AST-2020-001.html",
"refsource": "MISC",
"name": "http://downloads.asterisk.org/pub/security/AST-2020-001.html"
}
]
}
}

View File

@ -0,0 +1,67 @@
{
"CVE_data_meta": {
"ASSIGNER": "cve@mitre.org",
"ID": "CVE-2020-28328",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "n/a",
"version": {
"version_data": [
{
"version_value": "n/a"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "SuiteCRM before 7.11.17 is vulnerable to remote code execution via the system settings Log File Name setting. In certain circumstances involving admin account takeover, logger_file_name can refer to an attacker-controlled .php file under the web root."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "n/a"
}
]
}
]
},
"references": {
"reference_data": [
{
"url": "https://suitecrm.com/suitecrm-7-11-17-7-10-28-lts-versions-released/",
"refsource": "MISC",
"name": "https://suitecrm.com/suitecrm-7-11-17-7-10-28-lts-versions-released/"
},
{
"url": "https://github.com/mcorybillington/SuiteCRM-RCE",
"refsource": "MISC",
"name": "https://github.com/mcorybillington/SuiteCRM-RCE"
}
]
}
}

View File

@ -0,0 +1,18 @@
{
"data_type": "CVE",
"data_format": "MITRE",
"data_version": "4.0",
"CVE_data_meta": {
"ID": "CVE-2020-28329",
"ASSIGNER": "cve@mitre.org",
"STATE": "RESERVED"
},
"description": {
"description_data": [
{
"lang": "eng",
"value": "** RESERVED ** This candidate has been reserved by an organization or individual that will use it when announcing a new security problem. When the candidate has been publicized, the details for this candidate will be provided."
}
]
}
}

View File

@ -0,0 +1,18 @@
{
"data_type": "CVE",
"data_format": "MITRE",
"data_version": "4.0",
"CVE_data_meta": {
"ID": "CVE-2020-28330",
"ASSIGNER": "cve@mitre.org",
"STATE": "RESERVED"
},
"description": {
"description_data": [
{
"lang": "eng",
"value": "** RESERVED ** This candidate has been reserved by an organization or individual that will use it when announcing a new security problem. When the candidate has been publicized, the details for this candidate will be provided."
}
]
}
}

View File

@ -0,0 +1,18 @@
{
"data_type": "CVE",
"data_format": "MITRE",
"data_version": "4.0",
"CVE_data_meta": {
"ID": "CVE-2020-28331",
"ASSIGNER": "cve@mitre.org",
"STATE": "RESERVED"
},
"description": {
"description_data": [
{
"lang": "eng",
"value": "** RESERVED ** This candidate has been reserved by an organization or individual that will use it when announcing a new security problem. When the candidate has been publicized, the details for this candidate will be provided."
}
]
}
}

View File

@ -0,0 +1,18 @@
{
"data_type": "CVE",
"data_format": "MITRE",
"data_version": "4.0",
"CVE_data_meta": {
"ID": "CVE-2020-28332",
"ASSIGNER": "cve@mitre.org",
"STATE": "RESERVED"
},
"description": {
"description_data": [
{
"lang": "eng",
"value": "** RESERVED ** This candidate has been reserved by an organization or individual that will use it when announcing a new security problem. When the candidate has been publicized, the details for this candidate will be provided."
}
]
}
}

View File

@ -0,0 +1,18 @@
{
"data_type": "CVE",
"data_format": "MITRE",
"data_version": "4.0",
"CVE_data_meta": {
"ID": "CVE-2020-28333",
"ASSIGNER": "cve@mitre.org",
"STATE": "RESERVED"
},
"description": {
"description_data": [
{
"lang": "eng",
"value": "** RESERVED ** This candidate has been reserved by an organization or individual that will use it when announcing a new security problem. When the candidate has been publicized, the details for this candidate will be provided."
}
]
}
}

View File

@ -0,0 +1,18 @@
{
"data_type": "CVE",
"data_format": "MITRE",
"data_version": "4.0",
"CVE_data_meta": {
"ID": "CVE-2020-28334",
"ASSIGNER": "cve@mitre.org",
"STATE": "RESERVED"
},
"description": {
"description_data": [
{
"lang": "eng",
"value": "** RESERVED ** This candidate has been reserved by an organization or individual that will use it when announcing a new security problem. When the candidate has been publicized, the details for this candidate will be provided."
}
]
}
}

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in the enhanced Preboot eXecution Environment (PXE) boot loader for Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to execute unsigned code during the PXE boot process on an affected device. The PXE boot loader is part of the BIOS and runs over the management interface of hardware platforms that are running Cisco IOS XR Software only.\r The vulnerability exists because internal commands that are issued when the PXE network boot process is loading a software image are not properly verified. An attacker could exploit this vulnerability by compromising the PXE boot server and replacing a valid software image with a malicious one. Alternatively, the attacker could impersonate the PXE boot server and send a PXE boot reply with a malicious file. A successful exploit could allow the attacker to execute unsigned code on the affected device.\r Note: To fix this vulnerability, both the Cisco IOS XR Software and the BIOS must be upgraded. The BIOS code is included in Cisco IOS XR Software but might require additional installation steps. For further information, see the Fixed Software section of this advisory.\r "
"value": "A vulnerability in the enhanced Preboot eXecution Environment (PXE) boot loader for Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to execute unsigned code during the PXE boot process on an affected device. The PXE boot loader is part of the BIOS and runs over the management interface of hardware platforms that are running Cisco IOS XR Software only. The vulnerability exists because internal commands that are issued when the PXE network boot process is loading a software image are not properly verified. An attacker could exploit this vulnerability by compromising the PXE boot server and replacing a valid software image with a malicious one. Alternatively, the attacker could impersonate the PXE boot server and send a PXE boot reply with a malicious file. A successful exploit could allow the attacker to execute unsigned code on the affected device. Note: To fix this vulnerability, both the Cisco IOS XR Software and the BIOS must be upgraded. The BIOS code is included in Cisco IOS XR Software but might require additional installation steps. For further information, see the Fixed Software section of this advisory."
}
]
},

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in the web UI of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary code and execute arbitrary commands at the underlying operating system level.\r The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands at the underlying operating system level.\r "
"value": "A vulnerability in the web UI of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary code and execute arbitrary commands at the underlying operating system level. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands at the underlying operating system level."
}
]
},

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in the packet filtering features of Cisco SD-WAN Software could allow an unauthenticated, remote attacker to bypass L3 and L4 traffic filters. \r The vulnerability is due to improper traffic filtering conditions on an affected device. An attacker could exploit this vulnerability by crafting a malicious TCP packet with specific characteristics and sending it to a targeted device. A successful exploit could allow the attacker to bypass the L3 and L4 traffic filters and inject an arbitrary packet into the network.\r "
"value": "A vulnerability in the packet filtering features of Cisco SD-WAN Software could allow an unauthenticated, remote attacker to bypass L3 and L4 traffic filters. The vulnerability is due to improper traffic filtering conditions on an affected device. An attacker could exploit this vulnerability by crafting a malicious TCP packet with specific characteristics and sending it to a targeted device. A successful exploit could allow the attacker to bypass the L3 and L4 traffic filters and inject an arbitrary packet into the network."
}
]
},

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in the TCP packet processing functionality of Cisco IP Phones could allow an unauthenticated, remote attacker to cause the phone to stop responding to incoming calls, drop connected calls, or unexpectedly reload. \r The vulnerability is due to insufficient TCP ingress packet rate limiting. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the targeted device. A successful exploit could allow the attacker to impact operations of the phone or cause the phone to reload, leading to a denial of service (DoS) condition.\r "
"value": "A vulnerability in the TCP packet processing functionality of Cisco IP Phones could allow an unauthenticated, remote attacker to cause the phone to stop responding to incoming calls, drop connected calls, or unexpectedly reload. The vulnerability is due to insufficient TCP ingress packet rate limiting. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the targeted device. A successful exploit could allow the attacker to impact operations of the phone or cause the phone to reload, leading to a denial of service (DoS) condition."
}
]
},

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.\r The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information.\r "
"value": "A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information."
}
]
},

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in the web-based management interface of the Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user.\r The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information.\r "
"value": "A vulnerability in the web-based management interface of the Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information."
}
]
},

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in virtualization channel messaging in Cisco Webex Meetings Desktop App for Windows could allow a local attacker to execute arbitrary code on a targeted system. This vulnerability occurs when this app is deployed in a virtual desktop environment and using virtual environment optimization.\r This vulnerability is due to improper validation of messages processed by the Cisco Webex Meetings Desktop App. A local attacker with limited privileges could exploit this vulnerability by sending malicious messages to the affected software by using the virtualization channel interface. A successful exploit could allow the attacker to modify the underlying operating system configuration, which could allow the attacker to execute arbitrary code with the privileges of a targeted user.\r Note: This vulnerability can be exploited only when Cisco Webex Meetings Desktop App is in a virtual desktop environment on a hosted virtual desktop (HVD) and is configured to use the Cisco Webex Meetings virtual desktop plug-in for thin clients.\r "
"value": "A vulnerability in virtualization channel messaging in Cisco Webex Meetings Desktop App for Windows could allow a local attacker to execute arbitrary code on a targeted system. This vulnerability occurs when this app is deployed in a virtual desktop environment and using virtual environment optimization. This vulnerability is due to improper validation of messages processed by the Cisco Webex Meetings Desktop App. A local attacker with limited privileges could exploit this vulnerability by sending malicious messages to the affected software by using the virtualization channel interface. A successful exploit could allow the attacker to modify the underlying operating system configuration, which could allow the attacker to execute arbitrary code with the privileges of a targeted user. Note: This vulnerability can be exploited only when Cisco Webex Meetings Desktop App is in a virtual desktop environment on a hosted virtual desktop (HVD) and is configured to use the Cisco Webex Meetings virtual desktop plug-in for thin clients."
}
]
},

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in the web-based management interface of the Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user.\r The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information.\r "
"value": "A vulnerability in the web-based management interface of the Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information."
}
]
},

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in the web-based management interface of the Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.\r The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information.\r "
"value": "A vulnerability in the web-based management interface of the Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information."
}
]
},

View File

@ -36,7 +36,7 @@
"description_data": [
{
"lang": "eng",
"value": "\r A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system.\r The vulnerability is due to insufficient authorization checking on an affected system. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to gain privileges beyond what would normally be authorized for their configured user authorization level. This could allow the attacker to modify the configuration of an affected system.\r "
"value": "A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system. The vulnerability is due to insufficient authorization checking on an affected system. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to gain privileges beyond what would normally be authorized for their configured user authorization level. This could allow the attacker to modify the configuration of an affected system."
}
]
},