2025-03-23 03:03:54 +00:00

84 lines
6.1 KiB
JSON

{
"id": "CVE-2025-21727",
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"published": "2025-02-27T02:15:16.423",
"lastModified": "2025-03-13T13:15:50.650",
"vulnStatus": "Undergoing Analysis",
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\npadata: fix UAF in padata_reorder\n\nA bug was found when run ltp test:\n\nBUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0\nRead of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206\n\nCPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+\nWorkqueue: pdecrypt_parallel padata_parallel_worker\nCall Trace:\n<TASK>\ndump_stack_lvl+0x32/0x50\nprint_address_description.constprop.0+0x6b/0x3d0\nprint_report+0xdd/0x2c0\nkasan_report+0xa5/0xd0\npadata_find_next+0x29/0x1a0\npadata_reorder+0x131/0x220\npadata_parallel_worker+0x3d/0xc0\nprocess_one_work+0x2ec/0x5a0\n\nIf 'mdelay(10)' is added before calling 'padata_find_next' in the\n'padata_reorder' function, this issue could be reproduced easily with\nltp test (pcrypt_aead01).\n\nThis can be explained as bellow:\n\npcrypt_aead_encrypt\n...\npadata_do_parallel\nrefcount_inc(&pd->refcnt); // add refcnt\n...\npadata_do_serial\npadata_reorder // pd\nwhile (1) {\npadata_find_next(pd, true); // using pd\nqueue_work_on\n...\npadata_serial_worker\t\t\t\tcrypto_del_alg\npadata_put_pd_cnt // sub refcnt\n\t\t\t\t\t\tpadata_free_shell\n\t\t\t\t\t\tpadata_put_pd(ps->pd);\n\t\t\t\t\t\t// pd is freed\n// loop again, but pd is freed\n// call padata_find_next, UAF\n}\n\nIn the padata_reorder function, when it loops in 'while', if the alg is\ndeleted, the refcnt may be decreased to 0 before entering\n'padata_find_next', which leads to UAF.\n\nAs mentioned in [1], do_serial is supposed to be called with BHs disabled\nand always happen under RCU protection, to address this issue, add\nsynchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls\nto finish.\n\n[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/\n[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/"
},
{
"lang": "es",
"value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: padata: correcci\u00f3n de UAF en padata_reorder Se encontr\u00f3 un error al ejecutar la prueba ltp: ERROR: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0 Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206 CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+ Workqueue: pdecrypt_parallel padata_parallel_worker Call Trace: dump_stack_lvl+0x32/0x50 print_address_description.constprop.0+0x6b/0x3d0 print_report+0xdd/0x2c0 kasan_report+0xa5/0xd0 padata_find_next+0x29/0x1a0 padata_reorder+0x131/0x220 padata_parallel_worker+0x3d/0xc0 process_one_work+0x2ec/0x5a0 If 'mdelay(10)' is added before calling 'padata_find_next' in the 'padata_reorder' function, this issue could be reproduced easily with ltp test (pcrypt_aead01). This can be explained as bellow: pcrypt_aead_encrypt ... padata_do_parallel refcount_inc(&amp;pd-&gt;refcnt); // add refcnt ... padata_do_serial padata_reorder // pd while (1) { padata_find_next(pd, true); // using pd queue_work_on ... padata_serial_worker crypto_del_alg padata_put_pd_cnt // sub refcnt padata_free_shell padata_put_pd(ps-&gt;pd); // pd is freed // loop again, but pd is freed // call padata_find_next, UAF } En la funci\u00f3n padata_reorder, cuando se repite en 'while', si se elimina el alg, el refcnt puede disminuirse a 0 antes de ingresar a 'padata_find_next', lo que lleva a UAF. Como se mencion\u00f3 en [1], se supone que do_serial se debe llamar con los BH deshabilitados y siempre ocurre bajo la protecci\u00f3n de RCU, para abordar este problema, agreguesynchronous_rcu() en 'padata_free_shell' y espere a que finalicen todas las llamadas a _do_serial. [1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/ [2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/"
}
],
"metrics": {
"cvssMetricV31": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary",
"cvssData": {
"version": "3.1",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"attackVector": "LOCAL",
"attackComplexity": "LOW",
"privilegesRequired": "LOW",
"userInteraction": "NONE",
"scope": "UNCHANGED",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"availabilityImpact": "HIGH"
},
"exploitabilityScore": 1.8,
"impactScore": 5.9
}
]
},
"weaknesses": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary",
"description": [
{
"lang": "en",
"value": "CWE-416"
}
]
}
],
"references": [
{
"url": "https://git.kernel.org/stable/c/0ae2f332cfd2d74cf3ce344ec9938cf3e29c3ccd",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/573ac9c70bf7885dc85d82fa44550581bfc3b738",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/80231f069240d52e98b6a317456c67b2eafd0781",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/bbccae982e9fa1d7abcb23a5ec81cb0ec883f7de",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/e01780ea4661172734118d2a5f41bc9720765668",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/f3e0b9f790f8e8065d59e67b565a83154d9f3079",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"url": "https://git.kernel.org/stable/c/f78170bee51469734b1a306a74fc5f777bb22ba6",
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
]
}